|Place of Origin:||China|
|Minimum Order Quantity:||1pc|
|Packaging Details:||Inner package:plastic bag sealed package Outer package:carton package or wooden case package The lettering, nameplate, certificate for cryogenic valves are available We can customize the package for globe valve;|
|Supply Ability:||3000pcs per month|
|Material:||Stainless Steel||Port Size:||3/4''-4''|
forged globe valve,
forged steel globe valve
3/4'' - 4'' Flange Globe Valve Stainless Steel Self Sealing Easy To Maintain
The stainless steel globe valve is a compulsory sealed valve, so when the valve is closed, pressure must be applied to the disc to force the sealing surface to not leak. When the medium enters the valve from below the valve disc, the resistance to be overcome by the operating force is the friction between the valve stem and the packing and the thrust generated by the pressure of the medium. The force to close the valve is greater than the force to open the valve. The diameter must be large, otherwise the failure of the valve stem bending will occur. In recent years, since the emergence of self-sealing valves, the medium flow direction of the shut-off valve has changed from the upper part of the valve disc into the valve cavity. At this time, under the action of the medium pressure, the force to close the valve is small, and the force to open the valve is large. The diameter can be reduced accordingly. At the same time, this type of valve is also tight under the action of the medium.
Structural characteristics of stainless steel globe valve:
1. Advanced structure, reliable seal, excellent performance and beautiful appearance. The rigidity of the valve stem is increased, the noise and vibration are significantly reduced, and the service life and performance of the valve are improved.
2. The stop valve can be installed in any position of the pipeline, and the medium flows from the bottom to the top.
3. Above DN250 adopts advanced multiple seals, double brackets, guided movement (which can greatly improve the resistance to water hammer), and the medium enters from above. The stuffing room runs out, which effectively improves the valve's various performance and application range. ("Close" torque is 10% of the ordinary valve "Open" torque is 3% of the ordinary valve).
4. The stainless steel globe valve is suitable for pipes of various corrosive media, and has good corrosion resistance and sufficient strength.
5. Alloy steel globe valve is suitable for high temperature resistant steam and oil pipelines, and has high temperature resistant characteristics.
Notes When Use
1 . It should ensure that the pipe is blown clean before installation.
2 . When installing, make sure that the flow direction indicated by the arrow on the valve body should be consistent with the flow direction of the fluid.
3 . This valve has been degreased. Store and keep clean when installing.
4 . After the pipeline construction is completed, all the valves on the pipeline should be opened, and the residue in the pipeline should be thoroughly and thoroughly kept to ensure that the pipeline system is clean and free of debris.
5 . The installation system diagram with the oil-free requirements should be degreased.
6 . Slowly open and close during use.
7 . If the precision parts such as the valve disc, valve seat and valve stem are worn or damaged, it must be repaired and replaced in time.
8 . For parts such as gaskets and sealing materials, replace them with new ones each time.
Si Chuan Liangchuan Mechanical Equipment Co.,Ltd is a high-tech company specializing in the production of many kinds of valves,especially cryogenic valves.The main products are cryogenic valves,gate valves,globe valves,ball valves,butterfly valves, check valves,safety valves,etc.
Q1. What is your MOQ?
Our MOQ is one piece.
Q2. Do you provide sample for customer?
Yes, sample is available.
Q3. Do you do OEM service?
Yes, we accept OEM order and can make customer's LOGO on the products.
Q4. Do you support customization?
Yes, customization is acceptable.
Q5. Can you advise suitable cryogenic valves to me?
We have more than 15 years experience in cryogenic field. We are professional in valve selection and will advise you suitable valves with detailed parameters and prices.
Q6. How long is your delivery time?
It usually takes 5-30 days depending on the quantity of the order and the stock.
Contact Person: Doris