Tel:
SiChuan Liangchuan Mechanical Equipment Co.,Ltd
SiChuan Liangchuan Mechanical Equipment Co.,Ltd

SiChuan Liangchuan Mechanical Equipment Co.,Ltd

Home News

Brief Introduction of DJ61F Low Temperature Socket Weld Globe Valve For LN2,LO2,LAR,LO2

Company News
Brief Introduction of DJ61F Low Temperature Socket Weld Globe Valve For LN2,LO2,LAR,LO2
Latest company news about Brief Introduction of DJ61F Low Temperature Socket Weld Globe Valve For LN2,LO2,LAR,LO2

Brief Introduction

 

Cryogenic globe valve refers to a valve in which the closing member (valve) moves along the center line of the valve seat. According to this form of movement of the valve flap, the change of the valve seat port is directly proportional to the stroke of the valve flap. Because the opening or closing stroke of the valve stem of this type of valve is relatively short, and has a very reliable cut-off function, and because the change of the valve seat port is proportional to the stroke of the valve flap, it is very suitable for adjusting the flow rate. Therefore, this type of valve is very suitable for shut-off or regulation and throttling.

latest company news about Brief Introduction of DJ61F Low Temperature Socket Weld Globe Valve For LN2,LO2,LAR,LO2  0

 

 

Notes When Use


1 . It should ensure that the pipe is blown clean before installation.

 

2 . When installing, make sure that the flow direction indicated by the arrow on the valve body should be consistent with the flow direction of the fluid.

 

3 . This valve has been degreased. Store and keep clean when installing.

 

4 . After the pipeline construction is completed, all the valves on the pipeline should be opened, and the residue in the pipeline should be thoroughly and thoroughly kept to ensure that the pipeline system is clean and free of debris.

 

5 . The installation system diagram with the oil-free requirements should be degreased.

 

6 . Slowly open and close during use.

 

7 . If the precision parts such as the valve disc, valve seat and valve stem are worn or damaged, it must be repaired and replaced in time.

 

8 . For parts such as gaskets and sealing materials, replace them with new ones each time.

 

Pub Time : 2020-12-30 16:11:02 >> News list
Contact Details
SiChuan Liangchuan Mechanical Equipment Co.,Ltd

Contact Person: Doris

Tel: 15390079447

Fax: 86-28-83900878

Send your inquiry directly to us
SiChuan Liangchuan Mechanical Equipment Co.,Ltd
No.789,Baiyun Road,East Industrial Park,Xindu District,Chengdu City,Sichuan Province P.C. 610500
Tel:86-28-83900998
Mobile Site Privacy Policy China Good Quality Cryogenic Globe Valve Supplier. © 2020 - 2021 cryogeniccontrolvalve.com. All Rights Reserved.